FASTERHOLT FM4400H, User Manual And Spare Parts Catalogue

Page: 14 / 96

14
Standard menu:
SPEED Speed. Can be changed at any time during irrigation using the “+” and “-” keys.
ZONE Current zone 1...4, with corresponding speed. The speed cannot be changed. (Zone active)
DOSE The dose is calculated from the speed and constants and shows the current number of mm for irriga-
tion. As SPEED increases, DOSE decreases. (Constants 11 and 12)
TIME To set the time: Set SPEED to 11.1 m/h and press the PROG key 3 + 1 times until the dis-
play shows <CONST 1 TIME>. The time can then be set with the “+” and “-” keys. When the
battery has been disconnected, the clock will show 0:00 until it is set again.
STOP The time that irrigation is completed, incl. pre- and post-irrigation. If the clock is not set and shows 0:00, the
total irrigation time is displayed. .
STATUS Irrigation status, e.g.:
<
Stop Sensor
>
<
Irrigating
>
<
Pre-irrigating
>
<
Post-irrigating
>
<
LOW pressure
>
See explanation in STATUS chapter.
If the display shows: LOW BATTERY instead of SPEED, the battery voltage is below 11.8 V and the battery needs to be charged.
MENU 2
DISTANCE Length of the unwound hose. The length can be changed immediately after pressing the
PROG
key 3 times,
using the “+” and “-” keys.
BATTERY Battery voltage.
CHARGE ON Shows when the battery is being charged by a solar cell. The battery is charged when the voltage is below
14.0 volts.
PRE Shows the pre-irrigation time.
POST Shows the post-irrigation time.
The pre- and post-irrigation times can be changed immediately after pressing the PRE- or
POST
- keys, using
the “+” and “-” keys.
SPEED 30.0m/h
DOSE
22 mm
TIME 14:10 STOP 7:28
STATUS Running
DISTANCE 123m
DOSE 12.8V
CHARGE ON
0.231A
PRE 0:45 POST 0:45