(619) 665-2077
Installation and Operating Instructions
Water
Quick Tankless
- Hot Water Circulation Pump
Step 1. Choose the appropriate place to install the pump and Flow Monitor
:
Water
Quick Tankless
can be installed in several different configurations. The circulation
pump and
Flow Monitor
can be mounted in either the cold water supply line to the water heater
or in the hot water line going out of the water heater into the house.
Note
: It is important that you take into consideration how the pump will be supported and where
there is access to an electrical outlet.
Cold Water Line
:
If you install the circulation pump and
Flow Monitor
in the cold-water line it must be located on
the pipe that is the sole supply of water for the tankless heater. If it supplies water to any other
fixture it will lead to false activation of the pumping system.
Hot Water Line:
The pump and
Flow Monitor
can be installed in the hot water line that comes out of the water
heater and goes into the house. It does not need to be located next to the water heater, but it
needs to be located before the first hot water lateral.
Water
Quick Tankless
with built-in Pump Manager
