Fastcorp, LLC
DIVI Setup and Users Guide
Page
29
of
62
Rev 6
C.
EDIT SELECTION-
Allows you to change the price, edit bin location or add multiple chained bins to a single
selection.
D.
CREATE SELECTION –
Create new selections, with the ability to chain multiple bins to a single selection.
NOTE:
WHEN POSITIONING THE ROBOT OVER A BIN, THE ELBOW SHOULD POINT TO THE OPPOSITE SIDE OF
THE FREEZER FROM THE BIN. EXAMPLE- IF THE BIN IS LOCATED ON THE LEFT SIDE OF THE FREEZER THE
ROBOT ELBOW SHOULD POINT TO THE RIGHT SIDE AND VICE VERSA.
*** BINS NEAR THE CENTER OF THE FREEZER SHOULD BE PROGRAMMED WITH THE ELBOW POINTING TO
THE RIGHT SIDE***
Display
Programming Instructions
3) EDIT SELECTION
a) Press the #=Yes key. The robot will go to the delivery
point and the freezer lid will open.
* = Next
D = Back
# = Yes
ENTER SELECT #
b) Enter selection number to be edited.
# - Exit
A1 Price:
1.00
c) Type over the price and press the “#” key.
*=Exit
#=Accept
A1
Move The Robot
d) Adjust the position of the robot over the bin. Press
“#” key to save the bin location.
*=Cancel
#=Accept
Bin Height:
Tall
e) Select Tall or Short by pressing the *key. Press # to
accept.
*=Change
#=Accept
More Bins?
f) Press the #=Yes key to add additional (chained) bins
or press * to exit menu.
*=No
#=Yes
Robot Arm Positions
–
Programming.
Figure 10
