Air cooled water chillers and heat pumps
with radial fans
IDRA - RSC Series
Use, installation and maintenance manual
19
GB
RECEIPT AND STORAGE
On receipt of the goods, verify they have not been damaged and they conform to what indicated in the transport documen-
ts. Damages or incomplete supplies must be notifi ed immediately .
Store the units in suitable warehouses (temperatures from -20°C to max. +55°C).
HANDLING
The units can be handled both with fork lifters or cranes. When handling the unit, pay special attention not to damage the
condensing coil. Before moving the units, check their dimensions reported in the present manual. It is recommended to
handle the units still packaged.
Lifting with fork lifter
Lift the unit with a fork lifter of adequate loading capacity, verify that the forks lenght is at least 1200 mm.
Place the forks following the instructions shown in the fi gure below.
Be sure the unit is in perfect stable balance.
NPE').'.)
MFGPSDIFEFMDBSSFMMPFMFWBUPSF
EFWPOPTQPSHFSFEJBMNFOPNN
CBSJDFOUSPDJSDBNN
The forks must protrude 50 mm
at least
weight centre point = 570 mm approx.