LUBRICATION & MAINTENANCE
LUBRICATION & MAINTENANCE
Boom Sprayer 9500 / 9600
Page 99
Re-refined base stock products may be used
if the finished lubricant meets the
performance requirements.
Lubrication and Maintenance
Intervals
Perform each lubrication and service
illustrated in this section. Use a hand-held
grease gun for all greasing.
Wipe the implements’ grease fittings with a
clean cloth before greasing to avoid injecting
dirt or debris. Replace broken fittings
immediately.
If a fitting will not accept grease, remove and
clean it thoroughly or replace it. Clean the
passageway.
Each 8 hours or Daily
•
Clean
the
50-mesh
Strainer
(one/boom section valve)
o
It is recommended that the
fertilizer strainer screen be
removed and washed with
clean freshwater every 8
hours.
•
Clean the 30-mesh boom control
feed line.
•
Grease the telescoping hitch rollers
(if equipped.)
•
Grease the boom lift parallel linkage
(four each side)
Summary of Contents for 9500
