Fast & Fluid Management Harbil HA180, Operating And Safety Manual

Page: 33 / 36

Troubleshooting HA180 V. 2.0
33
5.4 Indicators on the display
5.5 Contact service
1. Find the type plate on the rear of the machine. See
§ 3.1.8
.
2. Take a note of the model number and the serial number of the
machine.
3. Contact your supplier or manufacturer.
See www.fast-fluid.com .
Indication Possible cause Possible solution
The error indicator is on See
§ 5.3
. See
§ 5.3
.
Canister refill indicator is on The canister is empty Refill the canister. See
§ 3.4.4
.
Can indicator blinks and is red The can is missing. Place the can. See
§ 3.2.2
.
Can indicator blinks and is green The dispense process is finished. Remove the can.
Brush is missing indicator is on The brush container is missing.
Put back the brush container.
See
§ 3.4.2
.
Emergency stop indicator is on
The emergency stop switch is
active. Reset the emergency stop switch.
See
§ 3.4.5
.
Brush refill indicator blinks and
the brush monitor indicator is on
The brush needs to be cleaned.
Clean the brush and the brush
container. See
§ 3.4.2
.