I:\DOKU\Fasel\FCU-EXT\DISPLAY\Modul\Ext-Display_Kurzanl_ohne_Symbole_EN
Stand: 06.09.2013
Keys
Display
Info
20.00
LED does not glow: you are in the standard display menu of the actual
values, here e.g. time
The LED
glows:
As long as this LED glows you are in the menu for changing the nominal
values. After some seconds without operating the key board, the program
automatically returns to main screen and the LED
goes out.
50°
The LED
glows
Display of the nominal temperature
50°
The LED
blinks
With the keys
and
you can set the desired temperature. To store
the values press the key
50r.H.
F 5
The LED
glows
If there is a humidity sensor then the nominal humidity is displayed e.g.
50r.H. or e.g. F 5 if there is no humidity sensor (Interval humidity).
50r.H.
F 5
The LED
blinks
With the keys
and
you can select the desired humidity. To store
the values press the key
06.00
The LED
glows
The heating duration is displayed
06.00
The LED
blinks
With the keys
and
you can set the desired duration of heating. To
store the value press the key
OFF
The LED
glows
Display for light ON/OFF or the dimmer level
LI 1
…
LI 9
The LED
blinks
With the keys
and
you can switch ON or switch OFF the light or
set the brightness. To store the value of the brightness press the key
OFF
The LED
glows
Display for the blower ON/OFF or the blower level
FASEL GmbH
Brief instruction for the operation of the internal display
FCU-EXT-DISPLAY-TOUCH
Some menus are available only if the corresponding bathing options or other options
are available.
FCU-EXT\DISPLAY_Kurzanl.pdf
Technische Änderungen vorbehalten
Seite 1 von 3