Fasel Elektronik FCU6x00 Series, Installation And Operating Manual

Page: 23 / 36

Operation
Installation and Operating Manual / Version V 1.02 23
6.4 Menu: settings
The following entries may be shown in the settings menu, depending on the configuration:
Symbol Description Function
Fan levels
setting

Press the key briefly to switch the fan on/off.

Press and hold the key to open the fan levels setting.
Light dimming

Press the key briefly to switch the cabin light on/off.

Press and hold the key to open the light dimming setting.
Timer settings
(optional)

Opens the timer menu.
Coloured light settings
(optional)

Press the key briefly to switch the coloured light on/off.

Press and hold the key to open the coloured light set-
tings.
Aroma settings
(optional)

Opens the aroma settings menu.
Bench heating
settings
(optional)

Press the key briefly to switch the bench heating on/off

Press and hold the key to open the menu to set the
bench temperature
Freely configurable option
(optional)

Press the key briefly to switch the respective option
on/off.
Basic settings:

Opens the basic settings menu.
Menu Back

Jumps to the previous menu.

This function is available in every menu.
Table 5: Menu: settings
6.4.1 Fan and light settings
The menu is used to adjust the cabin light and fan at 9 levels.
1. Use the slider to set the preferred level.
2. Use the Back key or Menu key to close the menu at any time. The set val-
ues for the current bath mode will be saved automatically.