En
FARO Laser Scanner Photon – User’s Manual
47 / 87
7.3.3
Position of the camera during a color scan
•
Make sure that the correct camera mount and camera orientation is
selected.
•
If you are using the new non-parallax camera mount with the sliding
mechanism, make sure that the camera is now in its parking position
over the mirror module and the scanner is wound up (Note: if you are
using the carbon fiber tripod wind up the scanner to the upper end
position of the center column. If you are using another tripod make
sure that the center column is wound up for at least 20cm).
Fig.54 Parking position of the camera
•
Note:
The center column of the tripod may have some horizontal
twist. When tightening the fastener, please make sure that the center
column is at its left or right horizontal end position.
