Faro FOCUS3D X 130, User Manual

Page: 38 / 190

FARO
®
Laser Scanner Focus
3D
X 130 Manual
January 2014
30
Chapter 5: Getting Started
In extreme windy conditions, please make sure that the tripod has a stable
standing. For this, you should affix a heavy weight to the tripod or sandbag its
feet.
Mounting the Focus
3D
X 130
To mount the Focus
3D
X 130 to a tripod we recommend using the quick release.
1 Remove the Focus
3D
X 130 from the case, check outer casing for any signs of
damage or distortion. Check mirror for damage due to scratches, cracks,
distortion and inspect for cleanliness.
2 Attach the upper part of the quick release to the scanner's mount. Make sure to
tighten the screw.
3 Mount the counter piece of the quick release onto the tripod. Make sure that it
is fixed securely.
4 Carefully mount the Focus
3D
X 130 with the upper part of the quick release to
its counter piece and lock its fastener. Test that the scanner is correctly locked
in place by gently attempting to lift it from the tripod.
5 If applicable, remove the ruggedized aluminium protection cover from the
scanner.
Figure 5-3 Gitzo Carbon Fiber Tripod (available as optional accessory)