Faro Focus 3D X 130, Training Manual

Page: 83 / 340

67
LMMMMM 2M MMMMMMM MMfMLMMM
Focus
3D
X 130 and X 330 • SCENE 5.3
September 2014
AMMMvMMy M.6M
MMMMMMM CMmmMM MMMM PMMMmMMMMM
In this activity, you will adjust the RMMMMMMMMM and QMMMMMy
settings, turn MMMM LMMM CMMMM on or off, and note how these
settings affect MMMM DMMMMMMM and PMMMM DMMMMMMM .
Given the settings in the table, determine the MMMM DMMMMMMM
and
PMMMM DMMMMMMM
and write the values in the table.
(See Appendix 1 for answers.)
RMMMMMMMMM
MMMMMMM
QMMMMMy
MMMMMMM
MMMM
LMMM
CMMMM
MMMM
DMMMMMMM
[hh:mm:ss]*
PMMMM DMMMMMMM
[mm at 10 m] [in at 30 ft]
1/1 4x Off
1/1 4x On
1/4 4x Off
1/4 4x On
1/4 8x Off
1/4 8x On
1/8 4x Off
1/8 4x On
1/8 2x Off
1/8 2x On
*When the MMMM DMMMMMMM is greater than an hour, seconds are not displayed; the format
changes from mmMMM to MMMmm . The scan durations are approximate and are based on
values displayed on the RMMMMMMMMM / QMMMMMy screen on the Focus
3D
X 330.
Follow these steps:
1. Adjust the RMMMMMMMMM and QMMMMMy settings.
A. From the LMmM screen, tap PMMMmMMMMM >
RMMMMMMMMM [MPMM] QMMMMMy .
B. Use the sliders or the buttons above and below the
sliders to adjust the settings.
Slides 72-76