Faro Focus 3D X 130, Training Manual, Page: 289 / 340

273
LMMMMM 2M PMMpMMMML MMMM DMMM fMM MLpMMMMML
Focus
3D
X 130 and X 330 • SCENE 5.3
September 2014
You can adjust the visibility settings for some elements (such as common
reference objects) using the Structure window. Right-click on the
element and click
Visibility
to switch the visibility on or off.
MMMMM
To adjust the visibility settings for an individual scan:
1. Open the scan in one of the views.
2.
In the Standard Toolbar , click Visibility Settings .
A
Visibility Settings
dialog box opens. In
Quick View
,
the dialog box has three tabs: View , Layer , and Extra . In
Planar View and 3D View , the dialog box has two tabs:
Layer and Extra . In Correspondence View , the dialog
box has four tabs: View , Scan Points , Layer , and Extra .
3. Click the
Layer
tab.
4. Click in the Visible and Names columns to switch the
visibility of each element on or off.
VMMMM
To adjust the default visibility settings for Planar View and 3D View :
1. In the
Structure
window, right-click on
Workspace
.
2. Click Visibility > 3D Visibility Settings or Planar View
Visibility Settings
.
A Visibility Settings dialog box opens.
3. Click the Layer tab.
4. Click in the Visible and Names columns to switch the
visibility of each element on or off.
AppMyMML MMMMM IMfMMmMMMMM
Applying color information involves using the photos taken by the
scanner when
Scan with Color
is enabled to add RGB values to the scan
points. It may be best to apply color information right before you are
ready to export, so that SCENE does not have to process the additional
information during other operations.