Faro Focus 3D X 130, Training Manual, Page: 287 / 340

271
LMMMMM 2M PMMpMMMML MMMM DMMM fMM MLpMMMMML
Focus
3D
X 130 and X 330 • SCENE 5.3
September 2014
TMMMbMMMLMMMMML
When scan data is cropped, you may need to zoom in or out
(move the mouse wheel in the image area) to refresh the
view.
AMMMvMMy M.3M
MMMppMML – DMMMMM
In this activity, you will practice detail cropping of unwanted
scan data.
Follow these steps:
7. Open a scan in PMMMMM VMMM .
A. In the MMMMMMMMM window, right-click on a scan and
click VMMM > PMMMMM VMMM .
A. Use the navigation tools, the mouse, and the mouse
wheel to find the area you want to work in.
8. View the area to be cropped in 3D VMMM .
A. Use the selection buttons to select the area you
want to crop.
B. Right-click on the selection and click VMMM > 3D
VMMM .
C. Click MMM LMMMMMMM PMMMM , click in the image area
to set the rotation point, and rotate the selection as
needed.