Faro Focus 3D X 130, Training Manual

Page: 250 / 340

234
MMMMMM MM MMMMMMMMMMMM MMMM M MMM
Focus
3D
X 130 and X 330 • SCENE 5.3
September 2014
LcMMvMMy M.4M
LMMMLMMMc MMMMMMMMMMMM – TMMMMMMMMM
In this activity, you will automatically register the full scans
in TMMMMMMM_[ Your Initials ].2 . You will start with TMp VMMM
BMMMM registration, and then use CMMMM MM CMMMM to refine
the registration.
Follow these steps:
1. Automatically register scans using the
TMp VMMM BMMMM
configuration.
A. In the Structure window, right-click on the cluster
TMMMMMMM_[ Your Initials ].2 .
B. Click OpMMMMMMMM > PMMpMMcMMMMMM > PMMpMMcMMM
ScMMM .
C. Select
PMMcM ScMMM
. Clear all other settings.
D. Click Configure .
E. On the drop-down menu, click TMp VMMM BMMMM .
F. Click OK .
G. Click OK .
H. Save the project.
I. Click FMMM > SMvM or click the SMvM tool.
2. Inspect the registration using the
ScanManager
and
3D VMMM . On the ScMM MMMMMMM tab, note the MMMM ScMM
PMMMM TMMMMMMM .
3. Automatically register scans using the
CMMMM MM CMMMM
configuration.
A. In the Structure window, right-click on the cluster
TMMMMMMM_[ Your Initials ].2 .