manualshive.com logo in svg

Faro FaroArm Quantum, User Manual, Page: 191 / 202

Share
Download
Faro FaroArm Quantum User Manual Download Page 191

D-1

 

Appendix D: FARO Service Policy 

This Service Plan (hereinafter, the “Plan”) is part of the Operating 
Manual for the FARO manufactured product purchased from FARO 
TECHNOLOGIES, INC. (hereafter, “FARO”). The Plan and all of the 
optional additions, are subject to the conditions in Appendices A, B, & 
C, and are subject to change at any time. This appendix refers to 
FARO’s service plans as written in the sales advertising literature, and is 
meant to provide additional details that the literature does not provide. 
1.00

The purchase of the Plan shall occur with the purchase of the 

FARO products. 
1.01

The Plan shall apply to systems exclusively created or authored 

by FARO.
1.02

The Plan shall include FARO product hardware only, and 

cannot be extended or transferred through the sale of any part of the 
system to a third party unless the entire system has been sold or 
transferred.
1.03

The Plan shall not cover Hardware or Software which has been 

subjected to misuse or intentional damage. FARO reserves the right to 
determine the condition of all returned Hardware and/or Software.
1.04

FARO shall determine the service method and contractor to 

service/repair all hardware which is not directly manufactured by 
FARO. All outside contractor terms and conditions are available from 
FARO and are incorporated herein by reference.
1.05

FARO shall not be responsible for any non-FARO authored 

software which inhibits the operation of the system. Furthermore the 
Plan will not cover the re-installation of any software.
1.06

The Hardware and Software are subject to changes in design, 

manufacture, and programming. All updates are as follows:

a) Hardware - The FaroArm and all of the associated optional 
parts, including the Computer, are not subject to updates.
b) Software - All computer programs, authored by FARO, which 
are used in conjunction with the FARO provided Hardware, will be 
updated in accordance with a particular update plan specific to the 
software.

08m80e00_FaroArm_Quantum.book  Page 1  Tuesday, August 22, 2017  11:03 AM

Summary of Contents for FaroArm Quantum











































































































































































































Reviews:

No comments