Farnell TRC-8543, Manual

Page: 15 / 22

Condition/State LED 1 LED 2
Hardware is communicating, and controller is in
Error Active state
Solid green Activity green (returns to
idle/off one second after last
TX or RX)
Hardware is communicating, and controller is in
Error Passive state
Solid green Activity red (returns to idle/off
one second after last TX or RX)
Hardware is running, and controller transitioned to
bus off
Solid green Solid red
TRC-8543 Specifications
The following specifications are typical for the range -40 °C to 70 °C unless otherwise
noted.
High-Speed/Flexible Data-Rate CAN Characteristics
Transceiver NXP TJA1043T
Max certified baud rate
5 Mbps
[1]
Input voltage limits CAN_H, CAN_L bus lines -27 VDC to +40 VDC
Output voltage limit CAN_H, CAN_L bus lines 5 VDC
MTBF Contact NI for Bellcore MTBF specifications
at other temperatures or MIL-HDBK-217F
specifications.
Low-Speed/Fault-Tolerant CAN Characteristics
Transceiver NXP TJA1055T
Max baud rate 125 Kbps
CAN_H, CAN_L bus lines voltage -27 VDC to +40 VDC
CAN Supply voltage range (V
SUP
) +9 VDC to +30 VDC
MTBF Contact NI for Bellcore MTBF specifications at other
temperatures or for MIL-HDBK-217F specifications.
© National Instruments
15
TRC-8543