Showing possible install location of yield monitor in middle of headliner
a.
Alternative:
Install the YM anywhere inside cab and align GPS antenna along
centerline of combine (shown below).
Showing Yield Monitor installed in aft right hand corner of cab (where switched power is
conveniently accessible)
In this install the GPS antenna was installed forward of the cab light in the headliner. This places
the GPS antenna along the center-line of the harvester.
Cable Routing:
8.
Once the Yield Monitor is mounted, route the Primary Cable through your cab/headliner
and out to underneath your cab. You will need to route it towards the clean grain
elevator.
