Signature Gear Flyball Electronic Judging System
Unpacking and assembly instructions
Required components:
@@ADD DETAILED CONTENT DESCRIPTIONS FOR EACH CASE
□
Qty 2 Black cases with one handle and two twist latches. These cases hold the
large displays.
□
Qty 2 Black case with tandem handles and three twist latches. This case holds
the uprights, main timing unit, wireless large display receivers and light tree
assembly and charger.
□
Qty 2 Nylon tripod cases. These two cases hold a total of three tripods – one for
each large display and one for the trees.
□
Qty 1 Nylon upright base bag. This bag holds the metal bases for the uprights
that will be placed at the start finish line.
□
Qty 1 Nylon audio bag. This case holds the amplifier/speaker and cable for the
audio function of the EJS.
You will also need:
□
40 AA batteries for a weekend and one 9-volt battery. Do not use rechargeable
batteries as they will not reliably operate the EJS components due to slight
voltage differences.
□
Three extension cords – one for each large display and one for the audio system
at the timer table.
□
Surge protection is
required
for each large display as well as the audio unit at the
timer table if the system is to be used outdoors and/or connected to a generator.
Surge protection is recommended in all other circumstances.
Step 1 – Inventory what you have received
□
Remove a copy of the EJS evaluation form from one of the longer black cases. If none
are present, one can be printed from the web by going to
http://nafadb.flyball.org/ejseval.htm
(form not yet ready - present soon). Check that you
have received all the cases listed here and that the set designations on the cases all match
(all the cases you have belong to the same set). Open each case and verify that the
components in each case also match the set designation. Note any discrepancies on the
form and also email
with any discrepancies and/or missing or
damaged items.
Revision 1.1
Page 1 of 6
29 November 2005
