16
WWW.FARMSCANAG.COM
AM-JACKAL-B / OCT 2018
ALARMS
Alarms are set on a per input basis. High/Low Alarm points can be set for speed,
hectares and RPM. Alarms will be displayed visually and made audible.
To
EDIT
your alarms re-run the wizard by pressing
SETUP
from the front screen.
Your existing settings will not be lost during the wizard re-run.
When an alarm has been tripped, the front screen will display the line number and name of the triggered function.
Example 1. In this example, an alarm is tripped when
the speed goes under 2km/h. The input number and
function name are displayed on the top right and will
continue to flash along with the function line.
Example 2. This Jackal has been setup to alarm
whenever the RPM reaches above 120rpm. In this
example, the rpm has gone above the max value to
132rpm and will notify the user until the rpm goes
below this value.
INPUTS
Inputs are the calibration factors used to
display the values correctly on the front
screen.
To
EDIT
your inputs re-run the wizard by
pressing
SETUP
from the front screen.
Your existing settings will not be lost during
the wizard re-run.
FRONT SCREEN
The front screen menu allows you to order the front screen line items. Highlight the line you wish to move, press
ORDER
(a
*
will appear to the left) then press
PLACE
to accept when you have chosen the new order.
Summary of Contents for 30007000-7999
Page 20: ......
