12
WWW.FARMSCANAG.COM
AM-JACKAL-B / OCT 2018
AREA & SPEED METER USING GPS SETUP (WIZARD)
The Jackal can display Speed & Area in any combination of km/Ha or mph/acre.
A wheel sensor is not required when using a GPS. GPS purchased from Farmscan
Ag are pre-programmed. If you BYO please ensure the following:
•
GPS programmed with RMC
–
GGA - VTG NMEA messages.
•
Any Baud Rate of - 4800,9600,19200,38400,115200
Available Connections -
REFER TO
SETUP
From the front screen press
SETUP
Highlight
WIZARD
and press
SELECT
Press
NEXT
Select
GPS
Press the
EDIT
button to
change the baud rate, when
the correct baud rate is
selected the corresponding
NMEA message will be
acknowledged with a Y.
Press
NEXT
Press EDIT to change the
input name or
Press NEXT to continue
Select km/h or mph to display
the speed on the front
screen.
You have the option to set
Alarm Min/Max points if
required. Using the NAV
buttons select and EDIT as
required. Press NEXT
If you have a 2
nd
sensor
connected to Input 1 press
NEXT to continue the
wizard.
Press EDIT to change the
input name or
Press NEXT to continue
Press the UP arrow to
highlight the width.
Press EDIT & use the NAV
buttons to change the
implement width. E.g. 12m.
Pressing EDIT will change the
Unit of Measure. Press NEXT
.
Press
EXIT & NEXT
to finalise
the setup of the Speed &
Area Wizard.
THIS ENDS THE
SETUP FOR SPEED/AREA
METER USING
GPS INPUT
Summary of Contents for 30007000-7999
Page 20: ......
