Manual
VIDIUM P 350 | P 450
22
│
24
9.
PROTECTION OF ENVIRONMENT
Dispose of oils and fats according to valid acts and regulations on wastes.
10.
DISPOSAL OF THE MACHINE AFTER THE END OF ITS
SERVICE LIFE
The operator must make sure that the steel parts and parts in which the hydraulic oil or lubricant is used are
separated for disposal.
The operator will cut the steel parts according to safety regulations and hand them over to the scrap yard for
secondary raw materials. For other parts follow the valid acts on wastes.
11.
MAINTENANCE AND TERMS OF WARRANTY
11.1
MAINTENANCE
Maintenance is provided by a business representative after a consultation with the Producer or by the
Producer. Spare parts are provided through the sales network of individual sellers all over the Czech
Republic. Use only spare parts according to the Spare Parts Catalogue officially published by the
Producer.
11.2
WARRANTY
11.2.1
The Producer provides 24-month warranty for the following parts of the machine: main frame, axle and
pole of the machine. The Producer provides 12-month warranty for the remaining parts of the machine.
The warranty starts on the date of the sale of the new machine to the end consumer (user).
11.2.2
The warranty applies to hidden defects that appear during the proper use of the machine during the
warranty period and according to the terms and conditions stated in the Operating Manual.
11.2.3
The warranty does not apply to spare parts that can be worn out, i.e. to regular wear and tear of
replaceable working parts (shares, blades etc.).
11.2.4
The warranty does not apply to indirect consequences due to potential damage, such as decrease in the
usable life etc.
11.2.5
The warranty is related to the machine and does not cease to exist when the owner changes.
11.2.6
The warranty is limited to disassembly and assembly, or replacement or repair of the faulty part. The
contractual service of the company Farmet a.s. decides whether the faulty part will be replaced or
repaired.
11.2.7
Only the authorized service technician of the Producer may perform repairs or other interventions in the
machine during the warranty period, otherwise the warranty will not be accepted. This provision does
not apply to the replacement of spare parts that can be worn out (see Item 11.2.3).
11.2.8
The warranty is conditioned by the use of original spare parts of the Producer.
Prepared by: Technický útvar, Farmet a.s., Jiřinková 276, Česká Skalice 552 03,
On
1 April 2014, Changes Reserved.
