9
│
40
Manual
TRITON 450 PS
|
600 PS
TRITON 450 PS
C.
MACHINE
HANDLING
USING
LIFTING
EQUIPMENT
C.1
The lifting equipment and tying means designed for handling of the machine must have their load
capacity at least identical with the weight of the handled machine.
C.2
(2)
Machine fastening for handling may only be performed in places designed for that and marked with
self-adhesive labels showing the "chain" symbol.
C.3
The lugs for machine fastening are located identically on both side frames of the machine, see the
pictures.
C.4
(3)
After fastening (suspending) at designated points, it is forbidden to move in the space of possible
reach of the handled machine.
C.5
Do not use the lugs on the roller supports under any circumstances when manipulating with the whole
machine. The lugs are only designed for replacing rollers and their maximum load capacity is 500 kg
(as shown on the label near the lugs).
HANDLING OF THE WHOLE MACHINE
