10.2 Machine adjustment using tractoŕs TPS arms
Use the TPS arms of the tractor to set the machine so that the shares in all rows work in the same
depth.
1 – Soil
2 – Machine frame on the plane – same depth in all rows
3 – TPS tractor arms – height adjustment
4 – Setting the depth of the tracing wheels
5 – Setting the depth of the rollers
Machine adjustment on the bar to lower hitch
1 – Setting the depth of the tracing wheels
2 – Machine frame on the plane – same depth in all rows
3 – Setting the depth of the tow bar
5 – Setting the depth of the rollers
•
The table provides information about the
individual operating positions and the number
of washers required to achieve a horizontal
plane of the machine (i.e. the same depth of all
working parts).
• Always use the same number of washers on
both drawbar piston-rods!!!!
28
|
39
Summary of Contents for TRIOLENT TX 470 PS
Page 2: ...2 39 Prepared by Technical Department Farmet a s on 26 3 2018 changes reserved ...
Page 4: ...PREFACE 4 39 IMPORTANT READ CAREFULLY BEFORE USE KEEP FOR FUTURE REFERENCE ...
Page 6: ...PREFACE 6 39 ...
Page 15: ...WORK SAFETY LABELS Fig 1 Location of safety labels on the machine 15 39 ...
