Farmet TRIOLENT TX 470 PS, Operating Manual

Page: 21 / 39

COMMISSIONING
8.1 Agregation to a tractor
• The machine can be connected only to a tractor, whose curb weight is identical or higher than
the overall weight of the connected machine.
• The machine operator must observe all generally valid regulations of work safety, health
protection, fire safety, and environmental protection.
• The operator may connect the machine exclusively to a tractor that is equipped with a rear
three-point suspension and a functional undamaged hydraulic system.
• The table of requirements for the towing means for work with the machine:
Requirement for
the tractor
engine power
for cultivator
TX 470 PS
150-220 kW* (200 - 300 HP)*
TX 600 PS
245-370 kW* (330 - 500 HP)*
TX 800 PS
295-440 kW* (400 - 600 HP)*
Requirement for
the tractor's TPS
Spacing of the lower suspension
joints (measured at the joint
axes)
1010±1,5 mm (39,76 in)
(possible to set also 910±1,5 mm/35,83 in)
Øof the hole of the lower
suspension joints for the machine
suspension pivots Ø37,5 mm (1,476 in)
Requirement for
the tractor's
hydraulic system
Side frame folding circuit
Circuit pressure 200bar (2900 Psi), 2 pcs of quick-
coupler sockets ISO 12,5
Circuit for lifting the machine on
the rollers Circuit pressure 200bar (2900 Psi), 2 pcs of quick-
coupler sockets ISO 12,5
Axle lifting circuit
Circuit pressure 200bar (2900 Psi), 2 pcs of quick-
coupler sockets ISO 12,5
Requirement for
the pneumatic
tractor system
Machine axle braking circuit Circuit pressure min.6 bar (87 Psi) – max. 8,5 bar
(123 Psi), 2 pcs coupling head of single-hose
brakes
• Connect the machine using the TPS suspension bar to the lower arms of the rear TPS of the
tractor, secure the TPS arms using pins against disconnecting.
When connecting, no persons may stay in the space between the tractor and the machine.
21 | 39