10.5 Machine travelling direction at work
Change the direction of work with the machine by 15-30° to the previous seeding/harvest operation.
That will help you achieve the best work results with the machine: a high crop residue throughput, mixing
crop residue in and the levelling effect (levelling the tracks from previous operations)
Seeding/harvest direction
Stubble plugging direction
When the machine works in the same direction as in the previous operations (seeding/harvest), it can
get clogged, which reduces the quality of work and the levelling effect of the machine.
40
|
50
Summary of Contents for SOFTER 9 PSW
