Manual
KOMPAKTOMAT K500PS | K600PS | K700PS | K800PS | K1000PS
35
│
56
7.3
ADJUSTING THE COMPONENTS OF WORKING ROLLERS
The design of the special roller versions require adjustment in order to provide quality soil processing.
Always adjust the rollers when the machine is in standstill and observe generally valid labour safety
regulations.
7.3.1
RR- RING ROLLERS
To keep the quality of soil processing, the position of the digital deflectors against the ring roller must be
adjusted.
Adjusting the position of deflectors can be highly individual. It depends on the soil and climatic
conditions.
FRONT RING ROLERS
Deflector setting options
1)
Angle setting
2)
Height setting
REAR RING ROLLERS
Deflector setting options
1)
Angle setting
2)
Height setting
7.4
ADJUSTING THE DEPTH OF THE SHARE SECTION
When adjusting the depth of the shares, always exercise extra caution as the working roller might
turn.
Always adjust the depth of the shares when the machine is in standstill and unfolded into the working
position.
The machine must be lifted on the axle and in the arms of the tractor so that it does not stand on the
shares.
The working depth of the shares is set in relation to the crop to be planted.
o
Beetroot…2-3 cm
o
Rapeseed …3-5 cm
o
Wheat, barley, oats …5-8 cm
SHARE SECTION VERSIONS (p. 17-18)
AL
CF
AP
Minimum preloading
Maximum preloading
1
1
2
2
