Manual
KOMPAKTOMAT K300P | K400PS | K450PS
13
│
44
1.
DESCRIPTION
Kompaktomat is structurally designed as a semi-carried folding machine aggregated behind a tractor. The
machine consists of a towing fork and supporting frames where the individual working parts are installed. The
modular design of the machine allows selecting various types of working parts so that the machine meets the
high demands of any soil conditions.
The basic version of the machine (see p. 4) combines seven soil-processing operations in a single pass.
The control for folding the side frames into the transport or working position is designed as a single
independent hydraulic circuit controlled by the driver in the tractor cabin.
The control of the axle in the transport or working position is designed as a single independent hydraulic
circuit controlled by the driver in the tractor cabin.
All Kompaktomat machines meet the regulations for road transportation.
The design of the Kompaktomat machine allows using a whole range of additional equipment to increase
productivity and efficiency, such as the automatic front leveller position control system using an independent
hydraulic circuit controlled by the driver in the tractor cabin, or the automatic share depth control using an
independent hydraulic circuit controlled by the driver in the tractor cabin. Kompaktomat may also be equipped
with a rear three-point hitch 2 which allows aggregating other pieces of equipment for soil processing or a
pneumatic drill machine behind Kompaktomat.
Tra
ck
cu
ltiv
at
o
r
w
ith
sw
ee
p
s
Fron
t
le
ve
lle
r
Fron
t
b
ar
r
o
lle
r
Sw
e
ep
se
ctio
n
Lev
elli
n
g b
ar
Re
ar
cru
m
b
ling
ro
lle
r
Re
ar
fin
is
h
in
g
le
ve
lle
r
3
-p
o
in
t
h
itch
to
w
in
g work
3
