Farmet FALCON 3, Operating Manual

Page: 29 / 99

Manual
FALCON 3 | 4 | 6 | 8
29
│
99
7.4. CONTROLLING HYDRAULICS
Procedure for unfolding and folding the machine

Open the blue ball valve located on the machine drawbar (A) LEAVE OPEN FOR WORK

Press the key for controlling hydraulics (B)

Then press the key for unfolding/folding (C) and unfold the machine

Confirm the task after the machine has unfolded (D)
Picture 13 – Procedure for folding/unfolding the machine

Controlling the rear sowing section – controlled from the tractor using the blue hydraulic circuit when
the application is activated (also possible to control when the display unit is off). Then in combination
with markers.

Controlling the front sowing section – controlled from the tractor using the yellow hydraulic circuit
when the application is activated. For transport, it is required to close the ball valve located on the
pole of the machine to prevent undesirable movement of the front section during transport.
A
D C B