10.2 Share securing
•
The basic setting of the securing spring is performed by the manufacturer at
395 ± 5 mm
so it is
horizontal.
•
Regularly check the nut tightening of the lower and the upper pivot of the securing, tighten as
needed.
•
Regularly check the nut tightening of the securing rod.
1 – Upper pivot
2 – Lower pivot
3 – Safety back stop
4 – Lower hardened case
5 – Upper hardened case
SHARES
Shares - nomenclature
Pos.
Title
Pos.
Title
1
Lower share SK
5
Top right share with deflector
2
Lower share MULTICARBIDE
6
Top left share with deflector
3
Top right share
7
Left wing
4
Top left share
8
Right wing
26
|
36
Summary of Contents for DUOLENT DX 210 N
