10.2 Machine adjustment using tractoŕs TPS arms
•
Set the lengthwise level of the machine by positioning the lower arms of the tractor and
adjusting the third point of the tractor, thus ensuring the same depth of processing for the first
and second row of discs.
A – Setting the drawbar length
B – Setting the tractor arms height
The machine features high stability during operation. However turning of machine to one side may occur
with fault adjusted longitudinal plane (particularly in heavy soils). This is removed by modification of
tractor arm height as follows:
•
When turning the machine to the left, the front discs are set lower
⇒
lift the machine in the
tractor arms and extend the third-point drawbar
•
When turning the machine to the right, the front discs are set higher
⇒
recess the front part of
the machine in the tractor arms and shorten the third-point drawbar
10.3 Setting the side deflector
•
Set the height of the side deflector so that it can catch soil flying from the front edge disc and
thus create a levelled surface between the individual operating drives.
23
|
38
Summary of Contents for DISKOMAT 3 N
Page 2: ...2 38 Prepared by Technical Department Farmet a s on 31 08 2023 changes reserved...
Page 4: ...PREFACE 4 38 IMPORTANT READ CAREFULLY BEFORE USE KEEP FOR FUTURE REFERENCE...
Page 6: ...PREFACE 6 38...
Page 15: ...WORK SAFETY LABELS Fig 1 Location of safety labels on the machine 15 38...
