29
13
Electronic machine control
Müller
Electronic
-
The electronic system controls all functions that are connected to the blue hydraulic circuit.
Work screen
*All icons on the terminal side are function keys (two-column image
)
.
1
Job information
11
Turn off the work application
2
Tramline settings
12
Empty tray indication
3
Motor 1 (dispenser)
13
Sensor information field (machine in working position)
4
Motor 2 (dispenser)
14
Adjusted target dose field in %
5
Motor 3 (dispenser)
15
Trip counting for tramlines
6
Site sowing function
16
Current state of the hopper 1/2/3 (can be changed)
7
Fields of active functions (markers, obstacle, swamp)
17
Speed of fan
8
Settings
18
Travel speed of the machine
9
Control of hydraulic functions of the machine
19
Dispenser dose information 1/2/3
10
Sowing rate correction
Beacon is activated.
Both markers activated manually.
Hopper lights are activated.
Manually activated left marker.
Working light is activated.
Manually activated right marker.
Function swamp is activated.
Markers are deactivated.
The dispensers are filled with seed.
Automatic markers (first left)
ISOBUS-TC is activated.
Automatic markers (first right).
Section-Control is activated, including
GPS
Obstacle function.
Hopper is empty.
Working speed of the machine.
Machine is in working position.
A tramline is being created.
An earlier engine stop is activated.
Calculated system pressure.
1
2
6
11
10
9
8
3
4
5
18
14
17
16
15
19
7
13
12
