User Manual, Base Station V2.0
Version 1.3
– Dec 2021
8
4 Prior to Installation
4.1
Test of Internet Performance
To ensure that the communication strength between the robot and the RTK Base Station is sufficient, the
operator should perform initial tests of the internet connection. The tests must be performed both at the field
where the robot is expected to operate and at the desired Base Station location.
It is recommended to use a smart phone to perform the internet performance test and follow the procedure
below:
1.
Download a “Speed test” app to a smart phone or use the following link:
2. Test the internet connection and performance at the field where the robot is expected to operate and
at the desired Base Station location.
3. Evaluate the test result of download speed to determine whether the connection is acceptable or
additional testing is required:
a. If the initial test result is above 1 Mbps, the internet connection is perceived as acceptable.
b. If result is below 1 Mbps, additional tests are needed.
The illustration below shows how to perform the tests at the field:
Note: The Base Station can be connected to an Ethernet internet connection. For more information on
this topic please contact your local FarmDroid distributor.
If the Base Station is mounted indoor, the internet speed has to be tested indoor as well, as the GSM-
antenna is located inside the Base Station cabinet, unless an external antenna is mounted.
4.2
SIM-card from FarmDroid
The Base Station is delivered with a factory mounted Multi-SIM solution which will provide the best and
safest connection to the Base Station. Subscription to this service and the data usage is free-of-charge for
the first year. The service will continue if the customer purchases a FarmDroid Care Subscription. For more
information, please contact your distributor.
4.3
SIM-card from Third-party Provider
The customer can also decide to purchase a SIM-card from a third-party provider. When purchasing a SIM-
card, it is highly important to choose a provider with a stable and good coverage in all the areas where the
Base Station and Robot is going to operate.
To provide the best possible conditions, it is recommended to use a Multi-SIM solution. A Multi-SIM is a
single SIM-card that connects to various operators and thereby chooses the network with the best
connection in the specific area.
