Farm King Model 1050, Operator And Parts Manual

Page: 99 / 174

97
Maintenance - 10" Backsaver Auger
STORAGE AND RETURN TO SERVICE
Storage
Sometimes it may be necessary to store your Farm
King Backsaver Auger for an extended period of time.
Below is a list of items to perform before storage.
• Thoroughly clean the equipment.
• Lubricate the equipment.
• Inspect the hitch and all welds on the equipment
for wear and damage.
• Check for loose hardware, missing guards, or
damaged parts.
• Check for damaged or missing safety signs
(decals). Replace if necessary.
• Replace worn or damaged parts.
• Touch up all paint nicks and scratches to prevent
rusting.
• Check the tightness of all cable clamps to avoid
slipping.
• Inspect the cables for wear or corrosion. Replace if
worn.
• Lubricate the cables.
• If stored outside, lower the auger to its lowest
position and block the wheels so the auger will not
move.
• Place the equipment flat on the ground.
Return To Service
After the Farm King Backsaver Auger has been in
storage, it is necessary to follow a list of items to
return the equipment to service.
•
Be sure all shields and guards are in place.
• Lubricate the equipment.
• Connect to a tractor and operate equipment, verify
all functions operate correctly.
• Check for leaks. Repair as needed.
DO NOT permit children to play on or around the
stored machine.