Farm King Model 1050, Operator And Parts Manual

Page: 77 / 174

75
Operation - 10" Backsaver Auger
Hydraulic Hopper Mover And Winch (If Equipped)
Enter the tractor and start the engine.
Engage the hydraulic circuit for the hopper / winch
control valve on the intake box. Run the tractor engine
at low idle.
ENTANGLEMENT HAZARD
To prevent injury to fingers and hands:
•
Keep hands clear of winch during operation.
CUT HAZARD
To prevent injury to fingers and hands:
•
Always wear heavy leather gloves when handling
a wire rope and operating the winch.
• Never guide the cable with your hands.
• Never let wire rope slip through your hands.
• Frayed, kinked or damaged wire rope must be
replaced immediately.
• Always stand clear of wire rope and hopper
during operation.
• Always stand clear and keep others away during
operation.
• Never touch wire rope or hook while in tension or
under load.
• Never touch wire rope or hook during winching
operation.
Never operate the hydraulic hopper mover or winch
when the PTO is engaged.
Always maintain a minimum of three wraps of cable
on the drum of the winch.