Farm King BW150, Operator And Parts Manual

Page: 23 / 74

Operation - BW150
23
GENERAL INFORMATION
Pre - Operation Checklist
Before operating the Bale Wrapper for the first time and
each time thereafter, check the following items:
1. Lubricate the equipment per the schedule outline in
the Maintenance Section. (See “SERVICE
SCHEDULE” on page 38.)
2. Check the Bale Wrapper hitch for damaged, loose or
missing parts. Repair as needed before operation.
3. Check that tire pressure.
4. Check that wheel bolt torque.
5. Fully clean the equipment.
6. Inspect all safety reflective decals, slow moving
vehicle decals and lights where applicable.
7. Check condition of all hydraulic components for leaks.
Repair as required.
NOTE: Do not operate with hydraulic leaks.
8. Verify that the mobile chassis lock has been removed.
9. Verify that the Bale Wrapper is properly connected to
the tractor with the safety chain.
MOVING PART HAZARD
To prevent serious injury or death from moving
parts:
• Keep hands, feet, hair and clothing away from
moving parts.
• Disconnect and lockout power source before
adjusting or servicing.
• Do not stand or climb on machine when
operating.
AVOID INJURY OR DEATH
Wear safety glasses to prevent eye injury when any
of the following conditions exist:
• When fluids are under pressure.
• Flying debris or loose material is present.
• Engine is running.
• Tools are being used.
Leaking fluids under pressure can enter the skin
and cause serious injury or death. Immediate
medical attention is required. Wear goggles. Use
cardboard to check for leaks.