manualshive.com logo in svg

Farm King 2400, Operator And Parts Manual, Page: 51 / 112

Share
Download
Farm King 2400 Operator And Parts Manual Download Page 51

Maintenance - Round Bale Carrier 2400

51

TROUBLESHOOTING

General Chart

NOTE: If a problem is encountered that is difficult to solve, even after having read through this troubleshooting

section, please call your local distributor or dealer. Before you call, please have this Operator And Parts
Manual and the serial number of your machine at hand.

PROBLEM

CAUSE

CORRECTION

No functions operating.

No hydraulic flow to control valve.

Make sure there is hydraulic flow going
to carrier’s valve bank. Supply line is on
the top side (Red dust cap) and Return
line is bottom line (Black dust cap).

Valve bank is not correctly configured 
to match tractor hydraulic system.

Make sure valve bank is correctly
configured to match tractor hydraulic
system type, OPEN-CENTER or
CLOSE-CENTER. 

NOTE: Select OPEN CENTER with
tractors having LOAD SENSING
hydraulic systems. See the tractor’s
manual for hydraulic system type.

No electric power.

Check electrical harness connection.

Check control handle fuse.

Bale Carrier freezes, creates back
pressure on hydraulic hose.

Hydraulic couplers are not the same
size and type as the tractor.

Make sure the female and male
couplers on the bale carrier are
compatible with the tractor.

Instructions are necessary before operating or servicing equipment. Read and understand the
Operator And Parts Manual and safety signs (decals) on equipment. Follow warnings and
instructions in the manuals when making repairs, adjustments or servicing. Check for correct
function after adjustments, repairs or service. Untrained operators and failure to follow instructions
can cause injury or death.

Summary of Contents for 2400

















































































































Reviews:

No comments