Farm King 1460, Operator And Parts Manual

Page: 43 / 168

Operation - Fertilizer Applicator 1460
43
GENERAL INFORMATION
Pre - Operation Checklist
Before operating the fertilizer applicator for the first time
and each time thereafter, check the following items:
1. Lubricate the equipment per the schedule outline in
the Maintenance Section. (See “SERVICE
SCHEDULE” on page 69.)
2. Check the fertilizer applicator hitch for damaged,
loose or missing parts. Repair as needed before
operation.
3. Check condition of all chemical / fertilizer components
for pinching, crimps or leaks. Realign as required.
Tighten fittings to correct leaks or replace
components. Straighten lines to eliminate pinching or
crimps.
NOTE: Do not operate with leaks.
4. Make sure that all guards and shields are in place,
secured and functioning as designed.
5. Check condition of all hydraulic components for leaks.
Repair as required.
NOTE: Do not operate with hydraulic leaks.
6. Check that all electrical connections are tight.
7. Check and tighten all wheel bolts to 420 ft.-lb. (567
N•m) torque.
8. Check tire pressure. Inflate per manufacturer’s
specification.
AVOID INJURY OR DEATH
Wear safety glasses to prevent eye injury when any
of the following conditions exist:
• When fluids are under pressure.
• Flying debris or loose material is present.
• Engine is running.
• Tools are being used.
Leaking fluids under pressure can enter the skin
and cause serious injury or death. Immediate
medical attention is required. Wear goggles. Use
cardboard to check for leaks.