Fargo FARGO DTC 400, User Manual, Page: 83 / 341

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400 Card Printer/Encoder User Guide (Rev. 2.2) 4-23
Resolving a Ribbon Out Error
All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
Step Procedure
1 Review the following information.

Symptom: Printer will not print.

Printer Error State: The Ribbon Sensor has detected the End Of Ribbon
mark

LCD Error Display: Ribbon Out

Driver Monitor Error Display: Ribbon Out
2 Replace the Ribbon Cartridge
a. Press on the Resume button.