Fargo FARGO DTC 400, User Manual, Page: 105 / 341

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400 Card Printer/Encoder User Guide (Rev. 2.2) 4-45
Resolving Ribbon Wrinkle problems
All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
Step Procedure
1 Review the following information.

Symptom: Printed cards have off-colored lines or streaks on them.

Printer Error State: None

LCD Error Display: None

Driver Monitor Error Display: None
2 Confirm that the Printer is using the most current Driver via:
http://www.fargo.com
3
Reduce the Dye-Sub Intensity setting within the Image Color tab of the Printer
Driver. See the
Using the Image Color tab (DTC400) .