Mi 2336
- 5 -
General notes
.
- Always hang up the handset at the end of
programming for each intercom.
- Repeat the programming steps for all
intercoms in the installation.
- Intercom conversations or connections with
users and external stations of other buildings
will not be possible if digital exchanger art.2273
is installed.
Ringing volume adjustment
To adjust the ringing level you must adjust the
trimmer
R52
on the intercom.
Additional functions
Call floor
When you make a call floor, you will hear a
different tone. The floor call is used to inform
that somebody is ringing at the house door.
The function is active both when the system is
free and busy.
Call Repeater
You can connect the intercoms as illustrated in
the diagram below to sent the intercom ring to
other locations in the house.
To make the programming easier and to
remind your self the stored codes, please fill
in the following table
Operation
Call from external station.
When a call is made from the external station,
the intercom generates an acoustic sound and
stays ON for about 30 seconds. Pick up the
handset to start conversation with the external
station for about 90 seconds and press button
"
" to open the door.
Connection with one or more external
stations without receiving the call.
Picking-up the handset when the system in
stand-by you will hear the tone of system ready.
Press the button “
” to start a communication
with the door station, from which the last call has
been made; to release the door lock press
again the “
” button.
If picking up the handset you did not get any
tone, the system is busy, and no other operations
are allowed until the system becomes free.
Making or receiving a call from another user.
When the installation is in stand-by, you can
make a call to another user. You must have
stored the address of the desired user’s in the
button “ ”. To make the call, pick up the handset,
wait for the free tone and press button “ ”. You
will hear the call tone and the intercom of the
called user will ring with a ring different from
calls from external stations or intercom calls
from the same apartment. If the called user
answers within 30 seconds, a 90-second
conversation starts, otherwise the system goes
back to free.
The internal conversation in progress will be
automatically interrupted in case of call from
external station to any other user.
If you pick up the handset and receive no tone,
the installation is busy and you must wait until it
is free.
Making or receiving an intercom call in your
apartment.
When the installation is in stand-by, you can
make an intercom call to all intercom in the
same apartment (max. 3) by pressing the button
“ ” you have programmed with code 000.
To make the intercom call, pick up the handset,
wait for the free tone and press button “ ”. You
will hear the call tone and the intercoms that are
enabled to receive intercom calls (internal
address 001 or 002) will ring with a ring tone
different from calls from external stations or
other users. The intercom will not ring if it is
coded with internal address 003. However, you
can pick up the handset and start a conversation
with the calling user. If the called user answers
within 30 seconds, a 90-second conversation
starts, otherwise the system goes back to free.
The internal conversation in progress will be
automatically interrupted in case of call from
external station to any other user.
0
1
2
3
4
5
Tone table
Tone of pressure of a button
.
It is activated to
indicate the pressure of one of the buttons
and
during the programming phase.
Programming ton
e.
It is activated to indicate the
system is waiting to be programmed.
Acknowledge tone
.
It is activated to confirm the
correct operation of the door lock release and
during the programming phase to indicate a valid
operation.
Tone of system ready
.
Activated for 30 seconds
if the system is free
Calling tone
.
It is activated during a call to another
user or during an intercommunicating call (active
for 30 seconds or until the called user answers).
Dissuasion tone
.
It is activated when a
nonexistent device is call or when a device is not
available.
End conversation tone
.
It is activated 10 seconds
before the conversation time ends.
0
1
2
3
4
5
0
1
2
3
4
5
0
1
2
3
4
5
0
1
2
3
4
5
0
1
2
3
4
5
0
1
2
3
4
5
Calling table
External call
Intercommunicating call
(modulated note)
Floor Call
Note
. All the acoustic signalling, with the
exception, of the system ready and calling tone
last after about 2 seconds.
0
1
2
3
4
5
0
1
2
3
4
5
0
1
2
3
4
5
Call from another user
(continuous tone)
0
1
2
3
4
5
0
1
2
3
4
5
0
1
2
3
4
5
0
1
2
3
4
5
0
1
2
3
4
5
0
1
2
3
4
5
0
1
2
3
4
5
0
1
2
3
4
5
0
1
2
3
4
5
