FARES INDUSTRIAL PRODUCTS
FARES
PCB
Breakout Board
MODEL: FIPBB01
©2011 FARES
PCB
Corporation
1
www.farespcb.com
GENERAL DESCRIPTION
FIPBB01 is a simple , cheap , buffered nonisolated parallel breakout board . It
supports four output control signal groups to drive four axis CNC machine. Each
signal group supports three control signals ( Enable , Direction and Clock ) . Two
output relays could be enabled via DIP switch for additional spindle control. FIPBB01
also supports five dry contact inputs for travel limit switches.
FIPBB01 features
1- Four output control signal groups. labeled X-axis, Y-axis, Z-axis, V-Axis.
2- Ena , Dir , Clk control signals are available. For pin assignment and address show table1.
3- LED indicator for each output signal.
4- Two output relays 5V coil / 3A contacts (resistive load).
5- Normally open and normally closed contacts are available.
6- LED indicator for each output relay.
7- Five external inputs (dry contact).
8- LED indicator for each input status.
9- All outputs and
inputs are brought out via pin header and screw clamp connector for flexibility.
10- no requirements for external power supply. Card is supplied from USB port.
11- Dimension: 180 x 70 x 18 mm.
Figure 1. FIPBB01 real PCB view
