Faraone PKS 1200E, Use And Maintenance Instructions

Page: 11 / 88

USE AND MAINTENANCE MANUAL - SECTION 1
AERIAL PLATFORM PKS 1200E-920-720 - Rev 02_2016 Page 1-4
OPERATION
General information
•
Only use the machine to lift personnel with the relative tools and
equipment.
•
Do not activate a faulty machine. If a fault occurs, switch-off the machine.
•
Do not suddenly move the control switches or levers from one position
to the opposite one, going via the neutral position; always bring the
switch to neutral position before moving it in the position corresponding
to the next function. Activate the controls by applying slow and even
pressure.
•
If there are people on the work platform, enable personnel to activate the
machine from the ground exclusively in the event of an emergency.
•
Completely lower the extending structure and disconnect the power
supply before moving away from the machine.
•
When welding is carried out with the machine, take precautions to protect
all machine components from contact with sprays generated from
welding or with the melted metal.
•
Ensure that the electric tools are put back correctly, avoiding leaving
them hanging on the cables in the work area of the platform.
•
You are reminded to charge batteries in a well-ventilated area.
Risk of falls
•
Before using the machine, ensure all rails and gates are fixed in the
correct position.