USE AND MAINTENANCE MANUAL - SECTION 4
ELEVAH 40 MOVE / 40 B AERIAL PLATFORM
– Rev. 12_2021
Page 4-19
ANTI-CRUSHING PROTECTION (OPTIONAL)
There is a device under the cage made up of an aluminium panel that stops the cage from
descending as soon as it is pressed.
If people or obstacles are inadvertently placed in the cage descent path, the device detects the
obstacle and stops the cage with an acoustic sound.
After the cage descent has been stopped, in order to restart the machine, the operator must slightly
lift the cage and move away from the obstacle, if necessary.
NOTE:
The image refers to a particular machine model, which may therefore vary depending on the machine
model on which the anti-crushing protection system is installed.
MAXIMUM CAGE HEIGHT BLOCK (OPTIONAL)
The maximum cage height block, when enabled, prevents the cage from exceeding a maximum
height defined by the manufacturer (from the ground to the cage floor).
The maximum height block is enabled or disabled by turning a selector with removable key in the
cage control console.
Maximum Height Block Selector
Enabling the Block
•
TURN the selector to the RIGHT and remove
the key.
Disabling the Block
•
TURN the selector to the LEFT.
NOTE:
The position of the selector with removable key shown in the picture may vary depending on the
control console of the machine model where the system is installed.
CAUTION
THE KEY SHOULD ALWAYS BE REMOVED WHEN THE MACHINE DOES NOT EXCEED
THE MAXIMUM HEIGHT IN ORDER TO PREVENT UNAUTHORISED USE.
