Far Tools One GGB 950, Original Version Translation

Page: 32 / 104

EN
GENERAL MAINTENANCE
ALL MAINTENANCE WORK IS CARRIED OUT WHEN THE ENGINE IS STOPPED. ALWAYS DISCON-
NECT THE SPARK PLUG LEAD.
SPARK PLUG INSPECTION
1- Check for discoloration and remove the carbon Standart electrode color : Tan
color.
2- Check the spark plug type and gap. Standard spark : BR5ES (NGK).
-Spark plug gap : 0,7 - 0,8 mm.
3- Install the spark plug. Spark plug Torque : 28Nm (2,8 Kgm, 20 lb.pi)
SILENCER
You should periodically remove the Carbon deposits.
1- Remove the muffler protector.
2- Remove the muffler
3- Remove the Carbon deposits using a wire brush and by trapping the muffler
body lightly.
4- Reinstall the muffler.
AIR FILTER
1- Remove the air filter cover and element.
2- Wash the element in solvent and dry.
3- Oil teh element and squeeze out excess oil. The element should be wet but not
dripping. recommanded oil : Foam-air-filter oil or SAE 20 motor oil.
4- Insert the element into the air filter .
N.B : Be sure the element sealing surface matches the air filter so there is no air
leak.
The engine and mufler will be very hot after the engine has been run. Avoid touching
the engine and muffler while are still hot with any part of your body or clothing during
inspection or repair.
!
© FAR GROUP EUROPE
118015-Manual-D.indd 32 30/03/12 15:38:04