Fanvil X3SP, User Manual

Page: 33 / 90

<
文档标题
>
Figure 28 - Call Holding Screen

Call Ended
When user finished the call, user can on-hook to hang up the call or press the hands-free button to
close the audio channel to hang up.
NOTICE! When the call is held or in holding state, the user must press [Resume] button to
back to call mode, or putting the handset back to the device or pressing Speaker-free button
to hang up is not available.
6.1.1
Make / Receive Second Call
The device can support up to two concurrent calls. When there is already a call established, user
can still answer another incoming call on either lines or make a second call on either lines.

Second Incoming Call
When there is another incoming call during talking a phone call, this call will be waiting for user to
answer it. User will see the call message in the middle of current screen. The device will not be
ringing but playing call waiting tone in the audio channel of the current call and the LED will be
flashing in green. User can accept or reject the call same as normal incoming call. When the waiting
call is answered, the first call will be put on hold automatically.