WB107
Wall Mount Bracket
Quick Installation Guide
www.fanvil.com
Page 1: ...WB107 Wall Mount Bracket Quick Installation Guide www fanvil com ...
Page 2: ...the position to be installed and mark the position of the screw hole 2 After removing the bracket use an electric drill to drill the 2 holes at the marked 3 Push or hammer screw anchors into the drilled holes then insert 2 screws as shown below Screw position 2 2 TA4 25mm Screw WB107 Wall Mount Bracket Quick Installation Guide www fanvil com Applicable models V series IP Phone ...
Page 3: ...e wall mount bracket into the slots on the back of IP phone And then slide the wall mount bracket to right as shown below 5 Pull the hookswitch tab in the handset cradle and rotate the hookswitch tab 180 degrees then reinsert the hookswitch tab as shown below 6 Finally mount the IP phone to the wall as shown below ...
Page 4: ......
