54
Picture 31 - Snapshot
Capture trigger mode: call state trigger
Call status trigger: save the screenshot to the local / server when the status of outgoing call,
incoming call and call is triggered.
Snapshot save path: local (SD card / USB flash disk)
Server address (supports uploading via FTP / TFTP / HTTP / HTTPS) ftp://IP : Port @ user
name: password / path
9.19 Phone Setting >> MCAST
It is easy and convenient to use multicast function to send notice to each member of the
multicast via setting the multicast key on the device and sending multicast RTP stream to
pre-configured multicast address. By configuring monitoring multicast address on the device,
monitor and play the RTP stream which sent by the multicast address.
The detail for
9.20 Phone Setting >> Action URL
Table 20- Action URL
Action URL Event Settings
URL for various actions performed by the phone. These actions are recorded and sent as xml files
to the server. Sample format is http://InternalServer /FileName.xml
