W611W User Manual
131 / 141
12.27
Function Key >> PTT
PTT
（
Push To Talk
）
is the intercom function, press and hold the communication and end the
communication.
Picture 140 -Web page PTT settings
Set the function key type to PTT, select the corresponding subtype (Speed Dial / Intercom / Multicast),
and then set the number / multicast address. The use of methods are described as follows:
Speed Dial
Users can directly dial the set number, which facilitates customers to dial the number that they often
need to call.
The position of the value fills in the number that requires speed dialing. After setting it, press and hold the
function key while on standby, the device initiates a call, and the opposite end can answer the communication
normally. Let go and end the call, and return to the standby interface.
Hold down the function key in the call, the device Hold original call, initiate the call, the opposite end
answer can be normal communication. After letting go, end the call and return to the original call interface.
Intercom
The phone can automatically answer the intercom call.
The position of the value fills in the required number to be intercom, after setting, standby, press the
function key not to put, the device initiates the intercom, the opposite end automatically answer, can be
directly called. Let go and finish the intercom, and return to the standby interface.
Hold down the function key in the call, the device Hold original call, initiate the intercom, and answer the
opposite end automatically. After letting go, finish the intercom and return to the original call interface.
MultiCast
Using the multicast function can easily and easily send voice broadcast to all members of the multicast
group.