Fanvil LINKVIL W610W User Manual Download

Page: 95 / 136

W610WUser Manual

96 / 136

11 Web Configurations

11.1 Web Page Authentication

The user can log into the web page of the phone to manage the user's phone information and operate

the phone. Users must provide the correct user name and password to log in.

11.2 System >> Information

User can get the system information of the device in this page including,



Model



Hardware Version



Software Version



Uptime



Memory information



System time

And summarization of network status,



Network Mode



Ethernet MAC



Wi-Fi MAC



Bluetooth MAC



Ethernet IP



Wi-Fi IP



Subnet Mask



Default Gateway

Besides, summarization of SIP account status,



SIP User



SIP account status (Registered / Unapplied / Trying / Timeout )

11.3 System >> Account

On this page the user can change the password for the login page.
Users with administrator rights can also add or delete users, manage users, and set permissions and

passwords for new users.

11.4 System >> Configurations

On this page, users with administrator privileges can view, export, or import the phone configuration, or

restore the phone to factory Settings.

Summary of Contents for LINKVIL W610W









































































































































Search results

Summary of Contents for LINKVIL W610W

Reviews:

Related manuals for LINKVIL W610W

Brands by name

Popular brands

Fanvil LINKVIL W610W, User Manual

Search results

Summary of Contents for LINKVIL W610W

Reviews:

Related manuals for LINKVIL W610W

Brands by name

Popular brands