Fanvil LINKVIL W610W User Manual Download

Page: 39 / 136

W610WUser Manual

40 / 136

Picture 20 - Call number

8.2 Answering Calls

When there is an incoming call while the device is idle, user will see the following incoming call on the

screen.

Picture 21 - Answering calls

User can answer the call by turning on the handset/headset/handsfree channel by pressing the dial key

or the handsfree key. To reject an incoming call, the user should press the hang up button

8.2.1

Talking

When the call is connected, user will see a talking mode screen as the following figure.

Picture 22 - Talking interface

Table 6 - Talking mode

Number

Name

Description

①

Voice channel

The icon shows the voice channel mode being used.

②

Default line

The line currently used by the phone.

③

Call-to-end name

The name of the person on the other end of the call.

④

Call-to-end number

The number of the person on the other end of the call.

Summary of Contents for LINKVIL W610W









































































































































Search results

Summary of Contents for LINKVIL W610W

Reviews:

Related manuals for LINKVIL W610W

Brands by name

Popular brands

Fanvil LINKVIL W610W, User Manual

Search results

Summary of Contents for LINKVIL W610W

Reviews:

Related manuals for LINKVIL W610W

Brands by name

Popular brands